Connecting To Hi-Vision Devices / Dvd Players - JVC D-ILA DLA-M2000LU Instructions Manual

Connecting to Hi-Vision Devices / DVD Players

Before connection, be sure to turn off both the projector and Hi-Vision devices / DVD players.
• Read thoroughly the manual that comes with each Hi-Vision device or DVD player.
• Use separately available BNC cables and audio cables to connect Hi-Vision devices and DVD players.
To PC2
BNC cable
(separately available)
Notes
• Connect a component signal output device or DTV-format signal output device.
• When the PC2 input terminal is used, "PC2 (BNC)" must be selected from the menu options. Refer to "Setting and Adjusting
Other Functions (OPTIONS)" on page 52.
• When the image signal is input to the PC2 input terminal, input the sound signal to the PC AUDIO terminal.
Memo
• Other devices with component signal output terminals (DVD player (NTSC), etc.) can be connected.
(*DVD: Digital Video Disc)
• DTV-format signals (480i, 480p, 720p, 1080i) can be input. For DTV-format signals which can be handled, refer to "Video
signals" on page 22.
To P /R-Y
R
R
P /R-Y
R
To Y
G
Y
To P /B-Y
B
B
P /B-Y
B
Audio cable
(separately available)
Hi-Vision devices
• W-VHS VCR
• Text/video camera
• Hi-Vision video camera
Y/C VIDEO
AUDIO
PC AUDIO
H
V
REMOTE
RS-232C
To PC AUDIO
DVD player
Connecting to Various Devices
25