Quick Alignment Function (Quick Align.) - JVC D-ILA DLA-M2000LU Instructions Manual

I Remote control unit
FREEZE OPERATE
HIDE
PRESET MENU
ESCAPE VIC SELECT
PC
+
DIGITAL
ZOOM KEYSTONE VIDEO
–
+
U T
SHIFT ZOOM FOCUS
D W –
+ +
QUICK
SHUTTER ALIGN. VOLUME
– –
QUICK ALIGN. button
RM-M2000 REMOTE CONTROL UNIT
Quick Alignment Function
(QUICK ALIGN.)
The Quick Alignment function automatically adjusts (sets)
the screen settings of the image input from the PC1 or PC2
input terminals. This can only be performed from the remote
control.
While projecting an image on the screen, press the QUICK
ALIGN. button on the remote control.
Quick alignment is conducted to obtain best image.
* During the automatic alignment, "Quick Alignment" appears
on the screen, and then disappears when the alignment is
completed.
Remote control unit
QUICK
ALIGN.
[Screen display]
Q u i c k A l i g n m e n t
Notes
• This only works for the signals input from the PC1 or PC2 input
terminals. It does not work for the signals input from the AV IN
terminal (VIDEO or Y/C input terminal).
• The quick alignment function is used to automatically adjust
the "Horizontal and vertical position", "Phase" and
"Tracking" of the projected image.
• When using the quick alignment function to automatically
adjust the image, use a bright, still-picture. It may not
function correctly on a dark or motion picture. If the results
obtained with the quick alignment function are not
satisfactory, manually adjust the "Horizontal and vertical
position", "Phase" and "Tracking" of the projected image.
Basic Operations
35