Miele H 7164 BP Operating And Installation Instructions page 82

Problem solving guide
Problem
Fault and a fault code
not listed here appears
in the display.
This function is not available
at the moment appears in
the display after select-
ing the Descale func-
tion.
Programmes that use
added moisture are not
taking in water.
A noise can be heard
after a cooking pro-
gramme.
The oven has switched
itself off.
Cakes/biscuits are not
cooked properly after
the duration given in the
cooking chart.
82
Cause and remedy
A fault has occurred that you cannot resolve.
 Call the Miele Customer Service Department.
The steam injection system is faulty.
 Call the Miele Customer Service Department.
Demo mode is active. You can select menu options
in the display and the sensor controls, but the pump
for the steam injection system is not working.
 Deactivate Demo mode by selecting
Showroom programme
The pump for the steam injection system is faulty.
 Call the Miele Customer Service Department.
The cooling fan remains switched on after a cooking
programme (see "Settings – Cooling fan run-on").
To save power, the oven switches off automatically if
a button is not pressed after a certain amount of time
or after a cooking programme has ended.
 Switch the oven back on.
A different temperature from the one given in the
recipe was used.
 Select the temperature required for the recipe.
The ingredient quantities are different from those
given in the recipe.
 Check whether you amended the recipe. The
addition of more liquid or more eggs makes a
moister mix which requires a longer cooking
duration.
Settings
| Demo mode | Off
|
.