Miele H 7164 BP Operating And Installation Instructions page 81

Problem
The sensor controls do
not respond.
Power cut appears in the
display.
12:00 appears in the dis-
play.
Max. op. hours reached
pears in the display.

Fault F32 appears in
the display.

appears in
Fault F33
the display.
Cause and remedy
You have selected the
When the oven is switched off, the sensor controls do not
respond.
 As soon as the oven is switched on, the sensor
controls will respond. If you want the sensor controls to
respond even when the oven is switched off, select the
|
Display QuickTouch
The oven is not connected to the power supply.
 Check that the oven plug is correctly inserted into
the socket and switched on.
 Check whether the fuse has tripped. Contact a
qualified electrician or the Miele Customer Service
Department.
There is a fault with the controls.
 Touch and hold the  On/Off sensor control until
the display switches off and the oven restarts.
There has been a brief power cut. This has caused
the current cooking programme to stop.
 Switch the oven off and then back on again.
 Restart the cooking programme.
The power supply was interrupted for longer than
150 hours.
 Reset the time and date.
ap- The oven has been operating for an unusually long
time. This has triggered the safety switch-off
function.
 Confirm with OK.
The oven is now ready to use.
The door lock for pyrolytic cleaning has not locked.
 Switch the oven off and then back on again. Start
the pyrolytic cleaning programme again.
 If the message appears again, contact the Miele
Customer Service Department.
The door lock for pyrolytic cleaning has not opened.
 Switch the oven off and then back on again.
 If the door lock still does not deactivate itself,
contact the Miele Customer Service Department.
Problem solving guide
Display | QuickTouch
| setting.
On
| Off setting.
81