Miele H 7164 BP Operating And Installation Instructions page 68

Cleaning and care
Finishing off the pyrolytic cleaning
process
When the time remaining has counted
down to 0:00 h, a message will appear
in the display to tell you that the door is
unlocking.
Process finished will appear in the display
and a buzzer will sound as soon as the
door has been unlocked.
 Switch the oven off.
The visual and acoustic signals will
switch off.

Risk of injury caused by hot
surfaces.
At the end of the pyrolytic cleaning
programme, the oven will still be very
hot. You could burn yourself on the
heating elements and oven
compartment.
Allow the heating elements and the
oven compartment temperature to
drop to a safe level before removing
any residues.
 Clean the oven compartment to
remove any pyrolytic residues (e.g.
ash) that may have built up
depending on the degree of soiling in
the oven.
68
Most residues can be removed with
warm water, a little washing-up liquid
and a clean sponge or a clean, damp
microfibre cloth.
Depending on the level of soiling, a
visible deposit could build up on the
glass on the inside of the oven door.
This can be removed with a
dishwashing sponge, a glass scraper
or a stainless steel spiral scourer and
a little washing-up liquid.
There is a delicate fibreglass seal
around the oven compartment to
seal the glass in the oven door. This
can be damaged by rubbing or
scouring.
Avoid cleaning the fibreglass seal.
Enamelled surfaces can be
permanently discoloured by spilt fruit
juices. Such discolouration does not
affect the properties of the enamel.
Do not attempt to remove these
stains.