Identify The Hardware Components: 2077-92F; Features On The Front Of The 2077-92F Expansion Enclosure - IBM Storwize V5000 Gen2 Quick Installation Manual

Table 17. Enclosure weight as FRUs are installed (continued)
Enclosure assembly
FRUs installed
• Enclosure (01LJ607 or
01LJ112)
• Secondary expansion
modules
• Fascia
• PSUs
• Expansion canisters
• Fan modules
• Fan interface board
• 92 3.5-inch Near-Line
SAS hard disk drives
Conversely, the overall weight of the expansion enclosure is reduced as you remove parts. However, even
with parts removed, the 5U expansion enclosure is heavy. Depending on the number of parts that remain,
you might need four persons or a mechanical lift to support the weight of the expansion enclosure.

Identify the hardware components: 2077-92F

You should become familiar with the external components of the 2077-92F expansion enclosure.
Components on the front of the enclosure
Figure 22 on page 36 shows the front of the 2077-92F expansion enclosure. In the figure, all parts are
installed in the enclosure.
Figure 22. Features on the front of the 2077-92F expansion enclosure
1 Display panel indicators
2 Rack retention thumb screws
3 Power supply unit indicators
4 Power supply units (PSUs)
5 PSU fascia (1U)
36 Storwize V5000 Gen2: Quick Installation Guide
FRUs not installed
• Cover
Approximate weight
kg
138.6
lb
305.6