Identify The Hardware Components; Storwize V5030 And Storwize V5030F Control Enclosure - IBM Storwize V5000 Gen2 Quick Installation Manual

__ • Two-port 25 Gbps Ethernet (RoCE or iWARP) host interface adapter
__ • Four-port 10 Gbps Ethernet adapter (iSCSI, FCoE)
__ • Four-port 12 Gbps SAS host interface adapter
__ • Four-port 1 Gbps Ethernet adapter (iSCSI)
__ • DC power supply (if applicable to the feature number ordered)
Options applicable to expansion enclosures
__ • Expansion enclosure attachment cables
__ • Drives
__ • DC power supply (if applicable to the feature number ordered)
__ • Power cords for connection to wall sockets

Identify the hardware components

The following graphics identify the hardware components and port locations for the control enclosure and
expansion enclosure on the system.
Control enclosure components
The following figures show the rear view of the Storwize V5000 Gen2 control enclosures. The location of
the power supply units and node canisters are also shown.
Figure 1 on page 6 shows the Storwize V5010 control enclosure.
Figure 1. Storwize V5010 control enclosure
Figure 2 on page 6 shows a rear view of the Storwize V5020 node.
Figure 2. Storwize V5020 control enclosure
Figure 3 on page 6 shows a rear view of the Storwize V5030 and Storwize V5030F control enclosure
Figure 3. Storwize V5030 and Storwize V5030F control enclosure
Data ports
6 Storwize V5000 Gen2: Quick Installation Guide