Fan Module Led - IBM Storwize V5000 Gen2 Quick Installation Manual

Figure 101. Fan module LED
Procedure
1. Using a cross head screwdriver, remove the narrow metal cover that is over the FIBs, as shown in
Figure 102 on page 97. The screws are on each side of the chassis. Place the cover and cover screws
in a safe location.
Figure 102. Location of the FIB cover
2. Use a cross head screwdriver to loosen the retaining screws on the FIB, as shown in Figure 103 on
page 98.
Chapter 2. Installing the system hardware 97