3. Area for the latching function
The mechanical latching speed can be adjusted via Poti (on the board, blue).
the door has to close safely when it is currentless. Raise the latching spped if needed (see point 2).
Important!
4. Mounting variants
DIN left
Lintel mounting
STANDARD pushing:
plug position = Y
Lintel mounting
STANDARD pulling:
plug position: X
Lintel mounting
STANDARD pushing:
plug position = Y
Leaf mounting
STANDARD pushing:
plug position = Y
Potentiometer
Potentiometer
Zuschlag
latching speed
max. min.
DIN right
Lintel mounting
INVERSE:
STANDARD pushing:
plug position = X
plug position = Y
Lintel mounting
INVERSE:
STANDARD pulling:
plug position = Y
plug position = X
Lintel mounting
INVERSE:
STANDARD pushing:
plug position = X
plug position = Y
Leaf mounting
INVERSE:
STANDARD pushing:
plug position = X
plug position = Y
INVERSE:
plug position = X
INVERSE:
plug position = Y
INVERSE:
plug position = X
INVERSE:
plug position = X
7