Table of Contents
Advertisement
2.8
Mini PCIe Installation
1.
Open the bottom cover and remove the riser card module. (Refer Chapter 2.4)
2.
Insert the Mini PCIe card into the Mini PCIe socket and latch into place.
2.9
Antenna Installation
1.
Remove the top heatsink by loosening the four screws. (See Section 2.4)
2.
Pass the internal antenna cable jack through the antenna hole in the rear panel
and fix it in place by tightening the matching nut.
3.
Attach the external antenna cable, and reassemble the top heatsink.
ARK-3440 User Manual
Figure 2.22 Mini PCI Card Installation
2
3
Figure 2.23 Antenna Installation
20
1
Advertisement
Table of Contents
