SMITH SYSTEM UXL Assembly Instructions

Power bar

UXL Power Bar

Assembly Instructions

UXL Power Bar Base Part Number:

ULPB______PLTFT

Examples:

ULPB60____PLTFT = UXL 60" Power Bar

ULPB72____PLTFT = UXL 72" Power Bar

ULPB84____PLTFT = UXL 84" Power Bar

For assistance in assembling product, missing or damaged parts, or to place

an order please contact customer service at 1-800-328-1061. You may also

place your order online at

www.smithsystem.com

Table of Contents

Need help?

Do you have a question about the UXL and is the answer not in the manual?

Page 1 UXL Power Bar Assembly Instructions UXL Power Bar Base Part Number: ULPB______PLTFT Examples: ULPB60____PLTFT = UXL 60” Power Bar ULPB72____PLTFT = UXL 72” Power Bar ULPB84____PLTFT = UXL 84” Power Bar For assistance in assembling product, missing or damaged parts, or to place an order please contact customer service at 1-800-328-1061.
Page 2 Special Notes: 1. Check that all components are accounted for and undamaged before assembling. 2. Please assemble product in a clean and dry area. 3. For larger units you may need another person to help assemble the product. 4. Clean the product with a mild cleaner and a damp cloth. Tools/Hardware 1.
Page 3 (2D) (2B) (2C) (2A) Step 3: Place the Leg Stabilizers (Wall or Island) onto the bottom of the UXL legs and use the M8x25 countersunk screws provided to fasten the stabilizers to the legs. Wall Stabilizer Island Stabilizer Step 4: Fasten the Power Strip to the inside of the frame.
Page 4 Step 5: With help, over to the upright position and place the included power domes into the holes in the work surface using the provided instruction. Once the domes are installed, route the plugs through the UXL wire manager leg if desired.