Cooking Time; End Time - Bosch HB.74 0 Series Instruction Manual

Cooking time

The oven allows you to set the cooking time for each type of
food. The oven switches off automatically when the cooking
time has elapsed. This avoids interrupting other tasks to switch
the oven off or exceeding the cooking time by mistake.
Example in the picture: Cooking time: 45 minutes.
Select the type of heating using the function control knob.
1.
Press the sensor twice.
0
2.
The display panel will show
symbol .
x
Programme the cooking time using the
3.
Sensor suggested value
Sensor suggested value
Press the ºC sensor.
4.
Set the temperature or required grill power using the
sensors.
The oven will switch on after a few seconds. The programmed
temperature will be shown on the display panel and the
symbol will light up.
x
The cooking time has finished
A beep will sound. The oven will stop heating. The display
panel will show : . Press the
‹‹ ‹‹
a new cooking time with the
sensor and turn the function control knob to zero. The oven is
switched off.
Changing the cooking time
Press the sensor twice. Change the cooking time using the
0
or sensors.
@ A
Cancelling the cooking time
Press the sensor twice. Reset the cooking time to
0
with the sensor . The time has been cancelled.
A
Viewing the time settings
If several time functions are programmed, the corresponding
symbols light up on the display panel.
To view the timer V , the cooking time
the time 0 , press the 0 sensor repeatedly until the required
symbol lights up. The corresponding value will be shown for a
few seconds on the display panel.
8
‹‹ : ‹‹ and the cooking time
@ or A sensors.
= 30 minutes
@
A = 10 minutes
sensor twice. You can set
0
or sensors, or press the
@ A
x , the end time

End time

The oven allows you to set the time when you want the food
ready. In this case the oven switches on automatically and
switches off at the set time. For example, the food may be
placed in the oven in the morning and the oven set so that it is
ready at midday.
Ensure that the food will not go off if it is in the oven for too
long.
Example in the picture: It is now 10:30 AM, the cooking time is
45 minutes and the oven should switch off at 12:30 PM.
Set the function control knob.
1.
Press the
2.
Programme the cooking time using the
3.
Press the
4.
The time when the dish will be ready and the end time
symbol y
Delay the end time using the
5.
@ or A
Press the ºC sensor.
6.
Set the temperature or required grill power using the
sensors.
The programmed temperature and the
on the display panel, and the oven will be set to standby. When
the oven turns on, the programmed temperature and the
0
x symbol will be shown. The
The cooking time has finished
A beep will sound. The oven will stop heating. The display
panel will show
a new cooking time with the
sensor and turn the function control knob to zero. The oven is
switched off.
:
‹‹ ‹‹
Changing the end time
Press the sensor
the or sensors. The altered time is shown after a few
@ A
seconds. Do not change the end time if the cooking time has
already started to count down. The final result may not be the
same.
y or
Cancelling the end time
Press the
0
current time with the
sensor twice.
0
sensor.
0
will be shown on the display panel.
or
@ A
y symbol turns off.
‹‹ : ‹‹ . Press the 0 sensor twice. You can set
@ or A sensors, or press the
0 three times. Change the end time using
sensor three times and reset the end time to the
sensor. The oven switches on.
A
or sensors.
@ A
sensors.
or
@ A
symbol will be shown
y
0