Sensors And Display Panel; Sensors To Modify The Programmed Values; Inside The Oven; Accessories - Bosch HB.74 0 Series Instruction Manual

Table of Contents

Advertisement

Sensors and display panel

The sensors are used to set different functions. The set values
are shown on the display panel.
Sensor
ºC
Temperature
Time functions
0
Minus
A
Plus
@
The symbol for the time function activated lights up on the
display panel.

Sensors to modify the programmed values

With the
or
sensors all fixed and recommended settings
@
A
can be changed.
@ = Increase programmed values.
@
A
= Reduce programmed values.
Ranges
30-270 Temperature
range
1-3
Grill power
Cleaning levels
1 sec. - 23:59 h.
1 sec. - 23:59 h.
When the oven is heating, the
panel. This light goes off when heating is paused. The symbol
does not light up for grill power and cleaning level.

Inside the oven

There is a light inside the oven. A fan prevents the oven from
overheating.
Light
The oven light remains on while the oven is working. The light
switches off at set temperatures of less than 60ºC and during
the clean function. This ensures optimum precision control.
However, the light can be turned on without the oven being on
by setting the function control knob to
Sensor function
Select the temperature and grill
power or cleaning level.
Select the timer
, the cooking
V
time
x
, the end time
y
time
.
0
Reduce programmed values.
Increase programmed values.
The temperature inside the oven in
ºC.
The power levels of the small sur-
face grill
and large surface grill
*
.
(
1 = level 1, low
2 = level 2, medium
3 = level 3, high
The self-cleaning levels
q
1 = level 1, low
2 = level 2, medium
3 = level 3, high
Cooking time.
Time set on the timer.
symbol lights up on the display
s
.
^
Fan
The fan can be turned on and off as necessary. The hot air
escapes through the top of the door. Warning! Do not cover the
vent. The oven could overheat.
The fan remains on for a certain length of time after the oven
has been switched off so that it can cool down more quickly.

Accessories

Racks may be positioned in the oven at 5 different heights.
and the
Up to 2/3 of a rack may be pulled out without it tipping over.
This makes it easy to remove food.





Racks may deform as they heat up. Once they have cooled, the
deformation disappears and their operation is unaffected.
Your oven is supplied with only some of the following
accessories.
Accessories may be purchased from the Technical Assistance
Service, from specialist retailers or on the Internet. Enter
the HEZ number.
.
Shelf
For pans, baking tins, roasts, grilled
items and frozen meals.
Put the shelf in the oven so that its
curvature is face down
¾
Flat enamel oven tray
For cakes, pastries and biscuits.
Place the tray in the oven with its
raised lip facing the door.
Universal deep enamel tray
For runny cakes, pastries, frozen
meals and large joints for roasting.
This can also be used as a tray to
collect the fat when roasting directly
on the shelf.
Place the tray in the oven with its
raised lip facing the door.
Accessory support
The universal deep tray or the flat
oven tray can also be cleaned dur-
ing the self-clean function.
Insert the accessory to the right and
left.
.
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hb.74 1 series

Table of Contents