Table of Contents
Advertisement
Cooking time
The cooking time for your dish can be set on the oven. When
the cooking time has elapsed, the oven switches itself off
automatically. This means that you do not have to interrupt
other work to switch off the oven. The cooking time cannot be
accidentally exceeded.
Example in the picture: cooking time 45 minutes.
Use the function selector to set the type of heating.
1.
Set the temperature or grill setting using the temperature
2.
selector.
Press the
0
button twice.
3.
00:00 is shown in the display. The time symbols light up and
the brackets are around
Use the
@
or
A
button to set the cooking time.
4.
Default value for
button = 30 minutes
@
Default value for
button = 10 minutes
A
The oven will start up after a few seconds. The cooking time
counts down in the display and the [
other time symbols go out.
The cooking time has elapsed
A signal sounds. The oven stops heating. 00:00 is shown in the
display. Press the
button. You can set a new cooking time
0
using the
or
button. Or press the
@
A
the function selector to the off position. The oven switches off.
Changing the cooking time
Use the
or
button to change the cooking time. After a few
@
A
seconds, the change is adopted. If the timer has been set,
press the
button beforehand.
0
Cancelling the cooking time
Use the
button to reset the cooking time to 00:00. After a few
A
seconds, the change is adopted. The cooking time is
cancelled. If the timer has been set, press the
beforehand.
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The symbol for the time-setting
option that is visible in the display is shown in brackets.
To call up the
U
timer,
r
clock, press the
0
button repeatedly until the brackets are
around the relevant symbol. The display shows the value for a
few seconds.
.
r
] symbol lights up. The
r
button twice and turn
0
button
0
cooking time,
p
end time or
End time
You can change the time at which you wish your dish to be
ready. The oven starts automatically and finishes at the desired
time. You can, for example, put your dish in the cooking
compartment in the morning and set the cooking time so that it
is ready at lunch time.
Ensure that food is not left in the cooking compartment for too
long as it may spoil.
Example in the picture: it is 10:30 am, the cooking time is
45 minutes and the oven is required to finish cooking at
12:30 pm.
Adjust the function selector.
1.
Set the temperature selector.
2.
Press the
0
3.
Use the
or
@
4.
Press the
0
5.
The brackets are around
ready is displayed.
Use the
@
or
6.
After a few seconds, the oven adopts the settings and switches
to standby position. The time at which the dish will be ready is
shown in the display and the
and
0
symbols go out. When the oven starts, you can see the
cooking time counting down in the display and the
in brackets. The
The cooking time has elapsed
A signal sounds. The oven stops heating. 00:00 is shown in the
display. Press the
using the
@
or
the function selector to the off position. The oven switches off.
Changing the end time
Use the
or
@
A
seconds, the change is adopted. If the timer has been set, first
press the
0
button twice. Do not change the end time if the
cooking time has already started to elapse. The cooking result
would no longer be correct.
Cancelling the end time
Use the
button to reset the end time to the current time. After
A
0
a few seconds, the change is adopted. The oven starts. If the
timer has been set, first press the
button twice.
button to set the cooking time.
A
button.
p
. The time when the dish will be
A
button to set a later end time.
p
symbol is in brackets. The
p
symbol goes out.
button. You can set a new cooking time
0
A
button. Or press the
0
button to change the end time. After a few
button twice.
0
U
symbol is
r
button twice and turn
11
Advertisement
Table of Contents
