Tape Roll Diameter; Tape Application Leg Length - Standard; Tape Application Leg Length - Optional; Box Board - 3M -Matic 800rf Instructions And Parts List

Random case sealer with accuglide 3 taping heads
Table of Contents

Advertisement

4-SPECIFICATIONS (continued)

4.6 Tape Roll Diameter

Up to 410mm [16 inch] maximum on a 76.2mm [3 inch] diameter core.
(Accommodates all system roll lengths of Scotch
4.7 Tape Application Leg Length – Standard
70mm ± 6mm [2 3/4 inch ±1/4 inch]
Tape Application Leg Length – Optional
50mm ± 6mm [2 inch ±. 1/4 inch]
(See "Removing Taping Heads Procedure – Changing the Tape Leg Length")

4.8 Box Board

Style – regular slotted containers – RSC
125 to 275 P.S.I. bursting test, single wall or double wall B or C fl ute.
23-44 lbs. per inch of width Edge Crush Test (ECT)

4.9 Box Weight and Size Capacities

A. Box Weight, fi lled: 65 lbs. [2 kg–30 kg] ,maximum. Minimum must be suffi cient to hold case on the
conveyor bed with bottom fl aps fl at.
B.
Box Size:
Length –
Width –
Height –
(See "Special Set-Up Procedures".)
Note: The case sealer can accommodate most boxes within the size range listed above. However, if the box
length (in direction of seal) to box height ratio is 0.6 or less, test run several boxes to ensure proper
machine performance.
DETERMINE THE BOX LIMITATIONS BY COMPLETING THIS FORMULA:
BOX LENGTH IN DIRECTION OF SEAL
Any box ratio approaching this limitation should be test run to ensure performance.
800rf-NA
Minimum
200mm [8.0 inch]
160mm [6.3 inch]*
140mm [5.5 inch]
BOX HEIGHT
fi lm tapes.)
®
Maximum
600mm [23.5 inch]
500mm [20 inch]
500mm [20 inch]
=
SHOULD BE GREATER THAN 0.6
13
2012 March

Advertisement

Table of Contents
loading

Table of Contents