Related Manuals for Adam Equipment CPW 25
Summary of Contents for Adam Equipment CPW 25
- Page 1 Adam Equipment CPW COMPACT SCALE © ADAM EQUIPMENT CO. LTD. pn. 3935 Rev. D, November 2002...
-
Page 2: Installing Batteries
(6 x AA Size). Remove the cover from the battery compartment under the stainless steel pan by lifting the tab. Install six AA size batteries as shown: It is suggested Alkaline batteries be used for best life. 6 X "AA" Alkaline © Adam Equipment Company 2002... -
Page 3: Specifications
Base: 310 x 300 x 50 mm Dimensions (w x d 12 ¼ x 12 x 2” x h) Indicator: 270 x 80 x 30mm 11 x 3 x 1” Gross Weight 4.8 Kg / 10.6 lb. © Adam Equipment Company 2002... -
Page 4: Operator's Instructions
, lb or oz scale in weighing mode Lo-bAt battery is weak, after 5 minutes the scale will turn off Show the Net Weight is being display (NW) or the Gross Weight is displayed (GW) © Adam Equipment Company 2002... -
Page 5: Set Functions
Time delay before the scale automatically turns off. Enable or disable the correction for the local gravity. Press and hold the TARE key for 3 seconds until the display shows “Set” then the first menu option “Unit” © Adam Equipment Company 2002... - Page 6 The “Grav” parameter controls if the scale will use the local value for gravity during calibration. Normally se t this parameter to OFF. Grav Advance to and then press the Gross/Net key to exit the menu. © Adam Equipment Company 2002...
-
Page 7: Fcc Compliance
Shielded interconnect cables must be employed with this equipment to insure compliance with the pertinent RF emission limits governing this device. Changes or modifications not expressly approved by Adam Equipment could void the user s authority to operate the equipment. - Page 8 ADAM EQUIPMENT is a global supplier with more than 30 years experience in the production and sale of electronic weighing equipment. Products are supplied and serviced from our company locations in the UK, USA and SOUTH AFRICA and distributed through a world wide dealer network.