ADJ NINJA 5RX User Instructions page 9

Ninja 5RX
Firmware Version
sion.
1. Press the MENU button until "Firmware Version" is displayed.
Press the ENTER button and the software vesion will be dis-
played.
2. Press the MENU button to leave this function.
PRO Default
- This will reset the unit to its default set-
tings.
1. Press the MENU button until "PRO Defaults" is displayed.
Press the ENTER button and either "Yes" or "No" will be dis-
played.
2. Press the MENU button to leave this function.
Reset
- Use this function to reset the unit.
1. Press the MENU button until "Reset" is displayed, press
ENTER.
2. The fixture will now reset.
ADJ Products - www.adj.com - Ninja 5RX Instruction Manual Page 16
System Menu
- This will display the software ver-
Ninja 5RX
To enter the Offset Menu, press the ENTER button for at least 3 sec-
onds. In this submenu you are able to adjust the home positions of
the pan & tilt motor.
Tilt 1 Offset
- Adjustment of mirror 1 home position.
1. Press the ENTER button for at least 3 seconds, then press the UP
or DOWN buttons so that "Tilt 1" is displayed, and press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
Tilt 2 Offset
- Adjustment of mirror 2 home position.
1. Press the ENTER button for at least 3 seconds, then press the UP
or DOWN buttons so that "Tilt 2" is displayed, and press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
Tilt 3 Offset
- Adjustment of mirror 3 home position.
1. Press the ENTER button for at least 3 seconds, then press the UP
or DOWN buttons so that "Tilt 3" is displayed, and press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
ADJ Products - www.adj.com - Ninja 5RX Instruction Manual Page 17
Offset Menu