ADJ NINJA 5RX User Instructions page 15

Ninja 5RX
Channel Value
10
0 - 127
128 - 189
190 - 192
193 - 255
11
0 - 7
8 - 15
16 - 131
132 - 139
140 - 181
182 - 189
190 - 231
232 - 239
240 - 247
248 - 255
12 0 - 255
13
0 - 69
70 - 79
80 - 89
90 - 99
100 - 109
110 - 119
120 - 129
130 - 139
140 - 199
200 - 209
210 - 255
ADJ Products - www.adj.com - Ninja 5RX Instruction Manual Page 28
13 Channel Mode
Function
CENTER CONE MIRROR
RANDOM ROLL
FAST - SLOW
STOP
SLOW - FAST
SHUTTER/STROBING
CLOSE
OPEN
STROBING SLOW - FAST
OPEN
FAST CLOSE - SLOW OPEN
OPEN
FAST OPEN - SLOW CLOSE
OPEN
RANDOM STROBE
OPEN
MASTER DIMMER 0% - 100%
SPECIAL FUNCTIONS
NOTHING
ENABLE BLACKOUT WITH TILTING
NOTHING
ENABLE BLACKOUT WITH COLOR
CHANGE
NOTHING
ENABLE BLACKOUT WITH GOBO
CHANGE
NOTHING
ENABLE BLACKOUT WITH ROLL
CHANGE
NOTHING
RESET ALL
NOTHING
Ninja 5RX
To remove the lamp, gently slide the lamp to the right to release
it. Once the lamp is released, grab the base with your thumb
and index finger and gently pull the lamp out towards the left
and away from the fixture. Insert the new lamp in reverse order.
ADJ Products - www.adj.com - Ninja 5RX Instruction Manual Page 29
Lamp Replacement
Locate the lamp access door
on the rear of the unit. Remove
the 4 phillips screws that hold
the access door in place.
Remove the access door to
access the lamp. Remove all
wires attached to the base of
the lamp.