Lexmark XC9225 User Manual page 90

Understanding the printer menus
Menu item
Device Operations
Safe Mode
Off*
On
Device Operations
Minimum Copy Memory
80 MB*
100 MB
Device Operations
Clear Custom Status
Device Operations
Clear all remotely‑installed messages
Device Operations
Automatically Display Error Screens
Off
On*
Device Operations
Honor orientation on fast path copy
Off*
On
Device Operations
Automatic Image Stabilization
On (700)*
Off
Device Operations
Enable Optional Parallel Port
On
Off*
App Configuration
LES Applications
Off
On*
Scanner Configuration
Scanner Manual Registration
Print Quick Test
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the printer to operate in a special mode, in which it attempts
to continue offering as much functionality as possible, despite
known issues.
For example, when set to On, and the duplex motor is
nonfunctional, the printer performs one‑sided printing of the
documents even if the job is two‑sided printing.
Set the minimum memory allocation for storing copy jobs.
Erase user‑defined strings for the Default or Alternate custom
messages.
Erase messages that were remotely installed.
Show existing error messages on the display after the printer
remains inactive on the home screen for a length of time equal
to the Screen Timeout setting.
Enable the printer to use the orientation setting under the Copy
menu when sending quick copy jobs.
Set the printer to adjust automatically the print quality.
Enable the optional parallel port.
Enable the Lexmark Embedded Solutions (LES) applications.
Notes:
•
When set to On, this setting does not affect built‑in
applications.
•
When the setting is changed, the printer restarts.
Print a Quick Test target page.
Note: Make sure that the margin spacing on the target page
is uniform all the way around the target. If it is not, then the
printer margins must be reset.
90