Lexmark XC9225 User Manual page 44

Loading paper and specialty media
Paper size
Other Envelope
SRA3
Statement
Universal
1
This paper is loaded only in short‑edge orientation.
2
The paper source supports paper size without size sensing.
Paper sizes supported by the finisher
Note: When a finisher is installed, the standard finisher bin becomes the default bin even for print jobs that
do not require finishing.
Supported paper sizes
Paper size
11 x 17
12 x 18
A3
A4
A5
A6
Executive
Folio
JIS B5
1
Paper is supported but the finisher does not stack, staple, or punch holes in it.
2
Paper is supported only if the finisher stacks and punches holes in it but does not staple it.
3
Paper is supported only if the paper size is 210 x 279.4 mm to 320 x 457.2 mm (8.27 x 11 in. to 12.6 x 18 in.).
4
Paper is supported only if the finisher stacks and staples the paper but does not punch holes in it.
5
Paper is supported only if the finisher stacks the paper but does not staple or punch holes in it.
6
Paper is supported only for two‑hole punch.
Dimensions
98 x 162 mm to
176 x 250 mm
(3.9 x 6.3 in. to 6.9 x 9.8 in.)
320 x 450 mm
(12.6 x 17.7 in.)
140 x 216 mm
(5.5 x 8.5 in.)
89 x 98.4 mm to
297 x 431.8 mm
(3.50 x 3.87 in. to
11.69 x 17.00 in.)
Staple finisher
1
X
1
1
1
ADF
Staple, hole punch
finisher bin 1
1
1
1
1
Scanner
X
X
2
Staple, hole punch
finisher bin 2
5
5
4
X
44
X
X
2
Booklet finisher
X
X
X
X
X