Understanding the printer menus
Menu item
Temperature
‑4 to 4 (0*)
Blank Pages
Blank Page Removal (Do Not Remove*)
Blank Page Sensitivity (5*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Admin Controls
Menu item
Text Default
5–95 (75*)
Text/Photo Default
5–95 (75*)
Photo Default
5–95 (50*)
Use Multi‑Page TIFF
Off
On*
TIFF Compression
LZW*
JPEG
Custom Job Scanning
Off*
On
Scan Preview
Off
On*
Note: An asterisk (*) next to a value indicates the factory default setting.
Flash Drive Print
Menu item
Number of Copies
1–9999 (1*)
Paper Source
Tray [x] (1*)
Multipurpose Feeder
Manual Paper
Manual Envelope
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Generate a bluer or redder output of the original document.
Set the sensitivity of scans in relation to blank pages in the original
document.
Description
Set the quality of text on the scanned image.
Set the quality of text and photo on the scanned image.
Set the quality of a photo on the scanned image.
Enable scanning of multiple TIFF images in one TIFF file.
Specify the compression type for TIFF files.
Set the printer to scan the first set of original documents using the specified
settings, and then scan the next set with the same or different settings.
Note: This menu item appears only when a hard disk is installed.
Show a scan preview of the original document.
Note: This menu item appears only when a hard disk is installed.
Description
Set the number of copies.
Set the paper source for the print job.
136