Operating Instructions - Flex X 1107 VE Original Operating Instructions

Operating instructions

t^okfkd>
_ÉÑçêÉ=éÉêÑçêãáåÖ=~åó=ïçêâ=çå=íÜÉ=ÉäÉÅíêáÅ=
éçïÉê=íççäI=éìää=çìí=íÜÉ=ã~áåë=éäìÖK
Before switching on the power tool
 Unpack the electric power tool and check
that no parts are missing or damaged.
 Attach sandpaper.
 Fit dust catcher.
Attaching or changing sandpaper
The sanding plate has Velcro fasteners and
is therefore designed exclusively for use with
Velcro sandpaper.
 Pull out the mains plug.
 Remove attached Velcro sandpaper
(optional).
 Remove any coarse debris from the san-
ding plate.
 Attach new Velcro sandpaper.
Attach the Velcro sandpaper in exact
alignment with the holes in the sanding
plate.
Attach the Velcro sandpaper by gently
pressing it against the Velcro fasteners
on the base of the sanding disc.
Dust extractor
Use the electric power tool only with an extrac-
tor. This will prevent high dust loads in the
working air and coarse debris at the work-
place. The grinding dust is extracted directly
from the point of abrasion through the extrac-
tion channels in the sanding plate.
14
klqb
qç=éêÉîÉåí=íÜÉ=éçïÉê=íççä=Ñêçã=ëíáÅâáåÖ=
íç=íÜÉ=ëìêÑ~ÅÉ=çÑ=íÜÉ=ïçêâéáÉÅÉI=ëÉí=íÜÉ=ëìÅíáçå=
éçïÉê=çå=íÜÉ=Éñíê~Åíçê=íç=~=ÅçêêÉëéçåÇáåÖäó=
äçï=äÉîÉäK
 Attach extraction hose to the connector
(Ø 28 mm). If required, use an appropriate
adapter.
 Connect extraction hose to the dust
extraction system.
Follow the operating instructions
for the dust extraction system!
Check the attachment!
Switching the electric power tool
on and off
Brief operation without engaged switch
rocker:
 Push the switch rocker forwards and hold
in position.
 To switch off the power tool, release
the switch rocker.
X 1107 VE