Noise And Vibration; Operating Instructions - Flex L 1503 VR Original Operating Instructions

Additional safety instructions
 The mains voltage and the voltage speci-
fications on the rating plate must correspond.
 Do not press the spindle lock until the tool
stops.

Noise and vibration

The noise and vibration values have been
determined in accordance with EN 60745.
The A evaluated noise level of the power tool
is typically:
– Sound pressure level:
– Sound power level:
– Uncertainty:
Total vibration value (when polishing painted
surfaces):
– Emission value:
– Uncertainty:
`^rqflk>
qÜÉ=áåÇáÅ~íÉÇ=ãÉ~ëìêÉãÉåíë=êÉÑÉê=íç=åÉï=
éçïÉê=íççäëK=a~áäó=ìëÉ=Å~ìëÉë=íÜÉ=åçáëÉ=~åÇ=
îáÄê~íáçå=î~äìÉë=íç=ÅÜ~åÖÉK
klqb
The vibration emission level given in this
information sheet has been measured in
accordance with a standardised test given in
EN 60745 and may be used to compare one
tool with another. It may be used for
a preliminary assessment of exposure.
The declared vibration emission level represents
the main applications of the tool.
However if the tool is used for different
applications, with different accessories or poorly
maintained, the vibration emission may differ.
This may significantly increase the exposure
level over the total working period.
For a precise estimation of the vibration load
the times should also be considered during
which the power tool is switched off or even
running, but not actually in use.
This may significantly increase the exposure
level over the total working period Identify
additional safety measures to protect the
operator from the effects of vibration such as:
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
`^rqflk>
tÉ~ê=É~ê=éêçíÉÅíáçå=~í=~=ëçìåÇ=éêÉëëìêÉ=
~ÄçîÉ=UR=Ç_E^FK
16
84 dB(A);
97 dB(A);
K = 3 dB.
2
a = 4.7 m/s
h
2
K = 1.5 m/s

Operating instructions

t^okfkd>
_ÉÑçêÉ=Å~êêóáåÖ=çìí=~åó=ïçêâ=çå=íÜÉ=éçäáëÜÉêI=
~äï~óë=éìää=çìí=íÜÉ=ã~áåë=éäìÖK
Before switching on the power tool
Unpack the polisher and check that there are
no missing or damaged parts.
Attach handle cover
 Loosen screws or handle.
 Push on handle cover (1.).
 Tighten screws (2.).
Switching on and off
Brief operation without engaged
switch rocker:
 Push the switch rocker forwards and hold
in position.
 To switch off the power tool, release the
switch rocker.
L 1503 VR