Bay-Tek Pop the Lock Service Manual page 29

TROUBLESHOOTING GUIDE
Problem
Monitor shows "No
Signal Detected"
Monitor
not
working.
Monitor has nothing at
all on power up.
Power
down, wait
5 minutes
and power
up again.
Error on screen at
power up.
Re-Boot game to see
if problem still exists.
Probable Cause
Monitor HDMI cable unplugged.
Faulty or loose RAM
Large power connector unplugged on
motherboard
Faulty power supply - Refer to Power Supply diagnostic section
Faulty motherboard - Replace faulty board. (AAMB9A-SHD)
Power cable unplugged from
monitor.
Faulty monitor.
Display shows "Kernel panic
– unable to mount root"
Display shows "ASROCK
Setup Utility Menu"
Display shows "Ubuntu—
Check drive for errors"
Ensure power is plugged into back
Replace monitor. (A5MO5500)
Faulty or loose RAM, faulty
software, faulty motherboard
No SATA drive in motherboard.
Plug in keyboard and press the "F"
key. It will check drive for errors and
start game.
11
29
Remedy
AAMB9A-SHD
of monitor, down to power strip.
Check for power connector