Cursor Function - JRC JMA-3400 Series Instruction Manual

5.15 CURSOR FUNCTION

Information on the cross cursor can be displayed on the screen.
Distance and direction from own ship to cursor position
Latitude and longitude of the cursor position
Arrival time to current cursor position
The cursor function is OFF in the initial state.
Refer to "8.9.3 OPERATION NUMERIC DISPLAY" for the setting method.
Note:
It is recommended to set this function after the Numeric Display (4).
The Numeric Display (0) to (3) have been used for another function in the initial state. If change those
settings, the speed display and coordinate position display may not be displayed.
Chapter 5 VARIOUS FUNCTIONS
83