Network - JRC JMA-3400 Series Instruction Manual

Chapter 8 DETAIL PERFORMANCE SETTINGS

8.12 NETWORK

Note: This function is not currently implemented. It will be supported in future by software version up.
The Network function is used for the display and operation of one antenna with two display units and the
transmission of radar echoes.
Long press the MENU button.
To 8.12.1
To 8.12.2
184
Input "0" and press ENT button.
Select each setting item.
Network Function
IP Address
Press the cross key (down) or turn the
MULTI control right to move the page
and select "Network".
RADAR echo transmission setting
To 8.12.3