JRC JMA-3400 Series Instruction Manual page 256

Chapter 10 MAINTENANCE AND CHECK
Alarm Code
*Screen notation
D031 AIS(Time Out)
D032 AIS(Data)
D033 AIS(Alarm001)
D034 AIS(Alarm002)
D035 AIS(Alarm003)
D036 AIS(Alarm004)
D037 AIS(Alarm005)
D038 AIS(Alarm006)
D039 AIS(Alarm008)
D040 AIS(Alarm025)
D041 AIS(Alarm026)
D042 AIS(Alarm029)
D043 AIS(Alarm030)
D044 AIS(Alarm032)
D045 AIS(Alarm035)
D046 Set Gyro
D047 DSP(Video)
D048 DSP(Trigger)
D049 DSP(AZI)
D050 DSP(HL)
D051 DSP Error
D052 LAT(Out of Bounds)
D053 TT(Out of Range)
D055 Flash ROM Error
D056 USB Error
D057 SD Error
208
Alarm Name Class
Alarm
Alarm
Alarm
Alarm
Alarm
Alarm
Alarm
Alarm
Alarm
Alarm
Alarm
Alarm
Alarm
Alarm
Alarm
Status
Alarm
Alarm
Alarm
Alarm
Alarm
Caution
Alarm
Alarm
Alarm
Alarm
Description
For AIS function=ON, cannot receive valid AIS data
(including checksum error) which had been received
properly.
For AIS function=ON, cannot receive valid AIS data which
had been received properly.
For AIS function=ON, an error from the AIS receiver is
received(ALR).
For AIS function=ON, an error from the AIS receiver is
received(ALR).
For AIS function=ON, an error from the AIS receiver is
received(ALR).
For AIS function=ON, an error from the AIS receiver is
received(ALR).
For AIS function=ON, an error from the AIS receiver is
received(ALR).
For AIS function=ON, an error from the AIS receiver is
received(ALR).
For AIS function=ON, an error from the AIS receiver is
received(ALR).
For AIS function=ON, an error from the AIS receiver is
received(ALR).
For AIS function=ON, an error from the AIS receiver is
received(ALR).
For AIS function=ON, an error from the AIS receiver is
received(ALR).
For AIS function=ON, an error from the AIS receiver is
received(ALR).
For AIS function=ON, an error from the AIS receiver is
received(ALR).
For AIS function=ON, an error from the AIS receiver is
received(ALR).
Requires setting of true bearing.
DSP detects VIDEO error.
DSP cannot receive TI interrupt.
DSP cannot receive BP interrupt.
DSP cannot receive BZ interrupt.
Abnormal operation(infinite loop) of DSP.
The own ship's latitude is 80 degrees or more (indicating
that some functions are limited). Display
AIS, waypoint, mark/line, own ship trail, etc. for 80
degrees or more.
Input operations for 80 degrees or more
( refer to "High Latitude "alarm)
TT is too far to be tracked.
Initialization error of flash ROM file system during startup.
Initialization error of USB during startup.
Chart SD card reading error.