Installing The Hard Drive Assembly; System Board Shield; Removing The System Board Shield; Installing The System Board Shield - Dell OptiPlex 7450 All-In-One Owner's Manual

Installing the hard drive assembly

1. Align the hard drive until the notches are aligned and the hard drive is secured in the bracket.
2. Place the hard drive onto the hard drive cage until the notches are aligned, then slide the Hard Drive assembly until the tab
locks into the cage.
3. Install the:
a. back cover
b. stand
4. Follow the procedure in

System board shield

Removing the system board shield

1. Follow the procedure in
2. Remove the:
a. stand
b. back cover
3. To remove the system board shield:
a. Press the securing tab to release the system board shield from the slots on the computer [1].
b. Slide the system board shield away from the computer [2].

Installing the system board shield

1. Align and slide the system board shield until it snaps in.
2. Install the:
a. back cover
b. stand
After working inside your
Before working inside your
computer.
computer.
Disassembly and reassembly 25