Table of Contents
Advertisement
2. In auto mode status, sweep the debris towards the infrared inlet area at
the bottom of the appliance, the appliance will detect the debris and
automatically vacuum for 10 seconds or till to the infrared inlet detect
no debris.
3. In manual mode, sweep the debris towards the inlet area at the bottom
of the appliance, press the 'START/OFF' button or touch the touch bar
with foot, vacuum starts to inhale debris.
4. When the collection bin is full of trash/garbage, the indicator light
"FULL" will ash with beep sounds.
5. Put your hand 10-30 cm above the cover sensor, the dustbin
cover will open automatically.
6. Take out the full- ll collection bin to take o the full lled trash
bag to discharge the trash/garbage.
Important: Do not pour any liquid, or throw any plastic bag or wet
objects into the inner collection bin.
Cleaning the Collection Bin:
1. Please turn o the power, and unplug the unit.
2. Open the dustbin cover. Pull the inner collection bin
out from the host.
3. Move the lter o the collection bin by the lifting the
loops.
4. Discharge the garbage properly from the garbage bag
in the inner collection bin.
5. Wash the bin in warm water with a mild soap.
Avoid harsh or abrasive cleaners or sponges.
Rinse thoroughly. To avoid damage, do not place
collection bin in dishwasher.
6. Clean sensors, dirt inlet area with a wet mop or towel.
(Do not use abrasive cleaning tools for cleaning.)
7. Put the collection bin back properly in position.
(If the collection bin is installed not in right place, the
machine will not work but have "Beep" sound until the
bin is put in right place.)
(a)
(b)
c
( )
www.PyleUSA.com
6
Advertisement
Table of Contents
