Product Maintenance; Cleaning Side Brushes; Cleaning Dust Bin And Filters - Pure Clean PUCRC95UK User Manual

PRODUCT MAINTENANCE

1. Cleaning Side Brushes

Clean the side brush when it gets dirty and replace it if it's damaged.
Maximum life span for side brush is 12 months.
Note: Before replacing side brushes, please pay attention to the left mark
and the right mark ('L'/ 'R') on side brushes, which match with the 'L'/ 'R' mark
on the bottom base of robot.

2. Cleaning Dust Bin and Filters

Empty and clean dust bin after each use following the steps as shown in the
below gures:
Press
A. Press PUSH to open the cover.
C. Take out HEPA.
F. Wash dust bin and
primary filter under
tap water.
Note:
a. Wash primary lter after 15~30 days of use.
b. Re-install the HEPA and primary lter after they're fully dry.
c. HEPA and primary lter could be replaced when needed.
d. Do not bake the lters under intense sunshine.
D. Open dust bin cover,
take out primary filter.
G. Clean HEPA filter
with brush, avoid
washing it under water.
13
B. Take out dust bin
E. Empty dust bin.
H. Install primary filter and HEPA back into
the dust bin.
www.PyleUSA.com