Table of Contents
Advertisement
IMPORTANT: Read this owner's
manual carefully and completely
before trying to assemble, op-
erate, or service this heater.
Improper use of this heater can
cause serious injury or death
from burns, fire, explosion,
electrical shock, and carbon
monoxide poisoning.
Only a qualified installer, service
agent, or local gas supplier may
install and service this product.
WARNING: Keep the appli-
ance area clear and free from
combustible materials, gasoline,
and other flammable vapors and
liquids.
WARNING: This appliance
can be used with propane or
natural gas. It is shipped from
the factory adjusted for use with
propane.
This appliance is only for use
with the type of gas indicated on
the rating plate. This appliance
is not convertible for use with
other gases.
DANGER: Carbon monoxide
poisoning may lead to death!
CARBON MONOXIDE POISONING: Early
signs of carbon monoxide poisoning resemble
the flu, with headaches, dizziness or nausea.
If you have these signs, the heater may not be
working properly. Get fresh air at once! Have
heater serviced. Some people are more af-
fected by carbon monoxide than others. These
include pregnant women, people with heart or
lung disease or anemia, those under the influ-
ence of alcohol and those at high altitudes.
200233-01B
SAFETY
NATURAL AND PROPANE/LP GAS: Natural
and Propane/LP gas are odorless. An odor-
making agent is added to the gas. The odor
helps you detect a gas leak. However, the
odor added to the gas can fade. Gas may be
present even though no odor exists.
this heater or its controls can
be dangerous.
WARNING: Do not use any
accessories not approved for
use with this heater.
WARNING: Carefully super-
vise young children when they
are in the room with the heater.
guard is in place before running
heater.
WARNING: Due to high tem-
peratures, the appliance should
be located out of traffic and away
from furniture and draperies.
WARNING: Heater becomes
very hot when running. Keep
children and adults away from
hot surfaces to avoid burns or
clothing ignition. Heater will re-
main hot for a time after shutoff.
Allow surfaces to cool before
touching.
clothing or other flammable
material on or near the appli-
ance. Never place any objects
in the heater.
www.usaprocom.com
WARNING: Any change to
WARNING: Make sure grill
WARNING: Do not place
3
- Quick Links:
- Specifications
- Installation
- Operation
- Troubleshooting
- Replacement Parts
- Parts
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the MNSD300HGA and is the answer not in the manual?
Questions and answers
I cant get the pilot light to light I followed the instructions correctly ??
To troubleshoot the pilot light issue on a Procom MNSD300HGA:
1. Check Gas Supply – Ensure the equipment shutoff valve is fully open.
2. Follow Lighting Instructions – Turn the control knob to OFF, wait five minutes, then try lighting the pilot again by pressing the ignitor button.
3. Manual Lighting – If the ignitor does not work, light the pilot with a match following the Manual Lighting Procedure (page 18).
4. Hold Control Knob – After lighting, keep the control knob pressed for 30 seconds.
5. Check Gas Pressure – If the pilot does not stay lit, gas pressure may be too low. Contact your gas supplier.
6. Consult Troubleshooting Guide – Refer to pages 20-24 for additional troubleshooting steps.
7. Seek Professional Help – If the issue persists, contact a qualified service technician or gas supplier for repairs.
This answer is automatically generated