Table of Contents
Advertisement
<RHD>
1.
Remove the driver's dashboard side cover by
releasing the five retaining clips.
2.
Remove the self-tapping screw. Pull down the
driver's dashboard under cover to release the
nine retaining clips.
3.
Unplug the vehicle connector and release the
harness clip on the vehicle connector (if
equipped) from the driver's dashboard under
cover to remove.
4.
Wrap the shop towel around the shift knob.
5.
Open the lid. Gently pry up on the front of the
trim ring to release the four clips, and remove
the trim ring.
RETAINING
CLIPS (9)
TRIM RING
08B28-SMR-6001-96
HARNESS CLIP
(if equipped)
DRIVER'S DASHBOARD
UNDER COVER
SHOP
TOWEL
RETAINING
CLIPS (5)
DRIVER'S
DASHBOARD
SIDE COVER
5511180S
VEHICLE
CONNECTOR
(if equipped)
SELF-
TAPPING
SCREW
6306121S
RETAINING
CLIPS (4)
LID
SHIFT
KNOB
5509011S
19 / 32
Advertisement
Table of Contents
