Honda 08E10-T5A-102 Installation Instructions Manual
Honda 08E10-T5A-102 Installation Instructions Manual

Honda 08E10-T5A-102 Installation Instructions Manual

Ambient lights for honda fit 2019

Advertisement

INSTRUCTIONS

PARTS LIST

2
Ambient lights
Bracket
Ambient light harness
8
Wire ties
Fuse label
3
Self-tapping screws
© 2018 American Honda Motor Co., Inc. – All Rights Reserved.
Accessory
AMBIENT LIGHTS
P/N 08E10-T5A-102

TOOLS AND SUPPLIES REQUIRED

Phillips screwdriver
10 mm Open end wrench
Ratchet
10 mm Socket
Diagonal cutters
Isopropyl alcohol
Shop towel
Masking tape
The following tools are available through the Honda Tool
and Equipment Program. On the iN, click on Service >
Service Bay > Tool and Equipment Program, then enter
the number under "Search". Or, call 888-424-6857.
• Trim Tool Set (T/N SOJATP2014)
• Plastic Trim Tool (T/N SILTRIMTL10)
Illustration of the Ambient Lights Installed in the
Vehicle
AII08735-01 (1804)
Application
2019 FIT
AMBIENT
2A FUSE
AMBIENT
LIGHT
LIGHT
HARNESS
Publications No.
VERSION 1
Issue Date
APR 2018
AMBIENT
LIGHT
1 of 7
08E10-T5A-1010-90

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 08E10-T5A-102 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Honda 08E10-T5A-102

  • Page 1 Illustration of the Ambient Lights Installed in the Vehicle Wire ties Fuse label Self-tapping screws AMBIENT 2A FUSE AMBIENT LIGHT LIGHT HARNESS AMBIENT LIGHT 1 of 7 © 2018 American Honda Motor Co., Inc. – All Rights Reserved. AII08735-01 (1804) 08E10-T5A-1010-90...
  • Page 2 Pull away the door opening seal, and remove the driver’s dashboard side lid. DOOR OPENING SEAL (Pull away.) DRIVER’S  5 RETAINING DASHBOAR TABS D SIDE LID 2 of 7 AII08735-01 (1804) © 2018 American Honda Motor Co., Inc. – All Rights Reserved.
  • Page 3 FUSE LABEL (2A FOOT LIGHT (ILLUMI+)) AMBIENT LIGHT  HARNESS ESCUTCHEON PANEL CENTER CONSOLE Attach the fuse label to the ambient light harness fuse case. 3 of 7 © 2018 American Honda Motor Co., Inc. – All Rights Reserved. AII08735-01 (1804)
  • Page 4 VEHICLE CLIP WIRE VEHICLE GREEN TAPE (Line up with  HARNESS AMBIENT LIGHT the vehicle clip.) HARNESS 4 of 7 AII08735-01 (1804) © 2018 American Honda Motor Co., Inc. – All Rights Reserved.
  • Page 5 14. Install the bracket to the driver’s dashboard lower DRIVER’S cover with one self-tapping screw. DASHBOARD LOWER COVER BRACKET SELF-TAPPING DRIVER’S SCREW DASHBOARD LOWER COVER AMBIENT AMBIENT LIGHT LIGHT HARNESS 4-PIN CONNECTOR 5 of 7 © 2018 American Honda Motor Co., Inc. – All Rights Reserved. AII08735-01 (1804)
  • Page 6 LIGHT HARNESS HARNESS 18. Secure the ambient light harness to the vehicle harness with one wire tie. WIRE TIE VEHICLE AMBIENT LIGHT HARNESS HARNESS 6 of 7 AII08735-01 (1804) © 2018 American Honda Motor Co., Inc. – All Rights Reserved.
  • Page 7 23. Plug the ambient light harness 4-pin connector into the ambient light, and install the passenger’s under LIGHT cover. SWITCH AMBIENT PASSENGER’S LIGHT UNDER COVER AMBIENT LIGHT HARNESS 4-PIN CONNECTOR 7 of 7 © 2018 American Honda Motor Co., Inc. – All Rights Reserved. AII08735-01 (1804)

Table of Contents