Nilfisk-Advance C 125.4 Repair Manual page 9

Pairing of the machine and the PowerGrip handle (Only PG version).
Pairing of the wireless devices is needed if:
the PowerGrip has been exchanged

the Wireless Unit in the PowerGrip has been exchanged

the Control Unit in the machine has been exchanged

the Wireless Unit has been exchanged in the machine

Or if the user hasn't paired the machine and the PowerGrip handle

Pairing of the machine and the PowerGrip handle:
1. Ensure that the machine is not turned on
2. Dismount the battery and mount the battery again
3. Orange indicator on the handle is now blinking in approx. 2 minutes, indicating that the
handle is in pairing mode.
4. Turn on the machine within the 2 minutes of pairing mode, when the orange indicator
stops blinking, the handle and the machine has been paired and can now be operated.
Exchange battery (cell type: CR 2032 ) in PowerGrip handle.
1. Dismount the screw (Phillips) and the cover to the battery. Dismount the old battery
2. Ensure that the new battery is mounted with the right polarity in the battery holder
3. Mount the battery cover and mount the screw
Service / Repair.
9
D