AMQ ACTIV DT Riser Installation Manual page 6
Hide thumbs
Also See for ACTIV DT Riser:
- Installation manual (5 pages) ,
- Troubleshooting manual (2 pages) ,
- Assembly manual (9 pages)
Advertisement
ADJUSTING VESA MOUNT TENSION
Step 1
Remove the M4X10 screw to
release the VESA mount.
Step 3
Use a 13mm wrench to adjust the M8 screw
on the VESA mount for appropriate tension
— clockwise to increase tension (for larger
monitors) and counterclockwise to decrease
tension (smaller monitors).
ACTIV DT RISER INSTALLATION GUIDE | 6
M4X10
Step 2
Take off rubber cover on the VESA
mount to expose the M8 screw.
amqsolutions.com
Advertisement
