AMQ ACTIV DT Riser Installation Manual page 5

DUAL MONITOR MOUNT
Step 1
Use M6X12 screws (x4) to attach the dual
monitor mount to top of the column.
Step 3
Use the M6X10 hand screws (x4) to fasten
monitor holder to dual monitor mount through
the horizontal cut-outs in the mount.
ACTIV DT RISER INSTALLATION GUIDE | 5
M6X12
Step 2
Prior to installing the monitors to the unit, use
the monitor mount screws from your monitor
to attach the VESA plates to each respective
monitor.
Note: Single monitor holder is re-used for the
dual monitor mount assembly.
M6X10
hand screw
amqsolutions.com