Needle Cooling From Above; Assembling The Needle Cooling - DURKOPP ADLER M-TYPE DELTA D867 Additional Instructions

Needle cooling from above

2

2.1 Assembling the needle cooling

Fig. 1: Assembling the needle cooling (1)
(1) - Arm cover
(2) - Head cover
(3) - Motor cover
(4) - Rear cover
To assemble the needle cooling:
1. Disassemble the arm cover (1).
2. Disassemble the front cover (7).
3. Disassemble the head cover (2).
4. Disassemble the motor cover (3).
Additional Instructions D867 - 01.0 - 04/2020
Needle cooling from above
WARNING
Risk of injury from sharp and moving parts!
Puncture or crushing possible.
Switch off the machine before assembling the
needle cooling.
①
②
①
③
④
②
(5) - Handwheel
(6) - Belt cover
(7) - Front cover
⑦
⑤ ⑥
5