DURKOPP ADLER M-TYPE DELTA D867 Additional Instructions page 16

12. Feed the hose (8) through cable holder (11).
13. Connect hose (8) with hose (14) using a plug nipple (12).
14. Feed the hose (14) through cable holder (13).
15. Erect the machine head.
Fig. 12: Assembling the needle cooling (4)
(14) - Hose
(15) - Throat plate slide
(16) - Screws
16. Disassemble the throat plate slide (15).
17. Loosen the screws (16).
18. Disassemble the throat plate (17).
19. Loosen the screws (19).
20. Remove the feed dog.
21. Assemble the new feed dog (18).
22. Align the feed dog (18) such that the needle pierces in the center of
23. Tighten the screws (19).
24. Connect the hose (14) to the feed dog (18).
25. Assemble the throat plate (17).
26. Assemble the throat plate slide (15).
14
⑮ ⑯ ⑰
the hole.
Needle cooling from below
⑯ ⑭
(17) - Throat plate
(18) - Feed dog
(19) - Screws
Additional Instructions D867 - 01.0 - 04/2020
⑲
⑱