Installing Eternity Ne; Preparing For Installation; Selecting The Site - Matrix ETERNITY NE Quick Start Manual

Preparing for Installation

Have the items listed below ready:
• A suitable location to install ETERNITY NE.
• Necessary telecom wiring in place, with wall jacks for extension lines at the required
locations.
• Standard, good quality, twisted pair telephone cables with RJ11 plugs.
• A dedicated Power Supply outlet close to the system.
• As many standard analog telephone instruments as you want to connect as SLT extensions.
You may select any standard telephone instrument like rotary phone, Pulse/Tone switchable
push-button phone, Feature phone or Cordless phone.
• A fax machine, if you want to connect one to the SLT Port of ETERNITY NE.
• One or more active, analog trunk lines from the CO network, as required.
• A SIM card to test mobile network connectivity, if GSM/UMTS is to be installed.
• SIP Account information to be configured in the system to test SIP calls, if the VoIP module is
to be installed.
• Any standard Open IP Phone or the Matrix Extended IP Phone to register as SIP Extension of
ETERNITY NE, if required.
• The Pen Drive and the License Voucher if Voice Mail System (VMS) is to be installed.
• A standalone computer or a computer connected in a LAN to access Jeeves, the web-based
configuration tool of ETERNITY NE.

Selecting the Site

Select an appropriate site to install the ETERNITY NE. The site should:
• be well-ventilated, moisture and dust free; not exposed to direct sunlight, heat or excessive
cold, or water; be away from water bodies and sources of water.
• be away from sources of electromagnetic noise such as any radio equipment, heavy
transformers, etc.
• have sufficient network coverage available, if the GSM/UMTS module is present in the
system.
Matrix ETERNITY NE Quick Start

Installing ETERNITY NE

3