Table of Contents
Advertisement
5.3
Error Codes and Troubleshooting
The electronics of the equipment continuously carries out tests. In case of deviations, an error code
appears on the display and normal operation is stopped for your safety.
+
E01: The drive does not receive the signal of the electronic meter (communication fault)
+
E02: Stall protection
+
E03: Speed sensing failure
+
E05: Overcurrent protection
+
E06: Open circuit of the motor
+
E10: Output short circuit
+
E13: The electronic meter does not receive the drive's signal (communication failure)
Please contact Sport-Tiedje for technical support.
23
Advertisement
Table of Contents
Troubleshooting
