Table of Contents
Advertisement
2.2
Errors and error diagnosis
The equipment runs through regular quality controls during production. Nevertheless, errors
or malfunctions on the equipment may occur. Individual parts are often the cause of faults and
replacement is usually sufficient. Please use the following overview to see the most common errors
and how to repair them. If the equipment still does not work properly, please contact your contract
partner.
PROBLEM
LCD error – software error etc.
SOLUTION
1. Hold Reset to start the console again.
2. Start the console again by disconnecting the power cable for about 15 seconds.
3. Disconnect and connect again all cable connections, see assembly instructions.
4. Change the console.
5. Contact a service technician of your contract partner.
9
Advertisement
Table of Contents
