Table of Contents
Advertisement
2.2
Faults and troubleshooting
The equipment runs through regular quality controls during production. Nevertheless, errors
or malfunctions on the equipment may occur. Individual parts are often the cause of faults and
replacement is usually sufficient. Please use the following overview to see the most common errors
and how to repair them. If the equipment still does not work properly, please contact your contract
partner.
Problem
Squeaking & cracking
noises
2.3
Maintenance and service calendar
The indoor cycle must be cleaned after every training session with a moist towel (no solvent!) in order
to avoid damage caused by sweat.
The following routine work must be executed in the specified time intervals:
Part
Check screws
8
Cause
Loose or too tight screw
connection
Weekly
Solution
Check or lubricate screw connection
Monthly
Annually
I
Weight Bench FB70
Advertisement
Table of Contents
