A&D UB-1100BLE Instruction Manual page 17

Device Setup (Pairing)
1. Ensure the Bluetooth® function of the mobile device is ON.
2. Launch up A&D Medical CONNECT app.
The icon to the left will
Blink on the monitor.
3. Accept the paining request from the pop-up window.
Multiuser Pairing
The monitor can be registered for up to 5 users. Follow the above instructions to pair the mobile device for each user.
New users can be added anytime. The user who has the lowest frequency of measurement times will be cleared
once the device has reached the 5 user max.
Note: If new user uses the same mobile device, then re-paining is not required as this has been complete.
Note: Default is in visitor non memory mode with out paining.
The communication distance between this monitor and the receiver device is about 33 feet (10m). This
distance can be reduced by the conditions in the surrounding environment, so be sure to check that the
distance is short enough for a connection to be made after measurement is complete.
Using the Monitor
CAUTION!
English 15