Preliminary Note; Symbols Used; Safety Instructions; Functions And Features - IFM DTE102 Device Manual

1 Preliminary note

1.1 Symbols used

► Instruction
> Reaction, result
[...] Designation of pushbuttons, buttons or indications
→ Cross-reference
Important note
Non-compliance can result in malfunction or interference
Information
Supplementary note

2 Safety instructions

Please read the operating instructions prior to set-up of the device . Ensure that the device is suitable for
your application without any restrictions
If the operating instructions or the technical data are not adhered to, personal injury and/or damage to
property can occur

3 Functions and features

The RFID evaluation unit DTE102 integrates an EtherNet/IP interface and 4 channels for the connection
of field devices . Each channel can be used either for the connection of an RFID antenna or as input/
output to IEC 61131 .
The device
● controls the data exchange to the RFID antennas or the sensor/actuator level .
● communicates with the higher-level control level via EtherNet/IP .
● allows device configuration via a web server .
Application examples:
● Material flow control in production lines
● Warehouse management by the automatic detection of stored products
● Tank management, order picking or product tracking

3.1 Configuration via Ethernet interface

● 10 Mbps and 100 Mbps
● TCP / IP - Transport Control Protocol / Internet Protocol
● UDP - User Datagram Protocol
● IT functionality: HTTP server
● M12, twisted pair

3.2 Functions for commissioning

Via the integrated Webserver it is possible to
● read the UID of the transponder
● read the user data area of the transponder
● write to the user data area of the transponder
4