Location Requirements; Table 2.2 Location Requirements - Fujitsu Storage ETERNUS LT140 User Manual

Chapter 2 LT140 Installation
2.3 Installation Area
2.3.1

Location Requirements

Choose a location that meets the criteria in
• The library was designed for rack installation and must be installed using the provided rack rails.
Installation on a table top or other similar surface could result in library operation errors.
• Select a rack with access to the host server.
Table 2.2 Location requirements
Criteria
Rack requirements
Rack space
requirements
Room temperature
Power source
Air quality
Humidity
FUJITSU Storage ETERNUS LT140 Tape Library User's Guide -Site Planning-
Table 2.2.
EIA standards, universal pitch 19-inch rack
3U for the Base Module and 3U for the Expansion Module
10-35º C (50-95º F)
•
AC Power Voltage: 100-240 VAC
•
Frequency: 50/60 Hz
•
Library Located near AC Outlet(s)
The AC power cord is the library's main AC disconnect device and must be easily removable
at all times.
•
Place the library in an area with minimal sources of particulate contamination
•
Avoid areas near frequently used doors and walkways, stacks of supplies that collect
dust, printers, and smoke-filled rooms
•
Excessive dust and debris can damage tapes and tape drive
20-80 percent RH non-condensing
22
Copyright 2018 FUJITSU LIMITED
Definition
P3AG-3712-01ENZ0