Fujitsu Storage ETERNUS LT140 User Manual page 20

Chapter 2 LT140 Installation
2.2 Cushioning Material for Transportation
3
Reattaching the top board.
3-1
Angle the top board and slide it towards the rear of the LT140 until it does not move.
3-2
Confirm that the edge of the top board can slide over the white blocks of the LT140.
When the top board is adjacent to the white blocks, lift the top board up and place it on the white
blocks.
3-3
Lower the front of the top board to attach it.
Step 1
FUJITSU Storage ETERNUS LT140 Tape Library User's Guide -Site Planning-
Step 2
Top board
Step 3
20
Copyright 2018 FUJITSU LIMITED
Place the top board over the white blocks.
End of procedure
P3AG-3712-01ENZ0