Supported Library Configurations - Fujitsu Storage ETERNUS LT140 User Manual

Chapter 2 LT140 Installation
2.3 Installation Area
2.3.4

Supported Library Configurations

The following configurations are supported for module libraries:
• The library will generally display logical element numbering of modules, storage slots and tape drives
starting with number one from the bottom up.
• When the amount and the position where the component is installed are changed, the re-setting of the
backup software is needed.
• Install tape drives from the bottom up for each module.
• If tape drives are installed in the Expansion Module, the PSU option must be added.
■ 1Module Library (Base Library)
Logical element numbering
of modules
FUJITSU Storage ETERNUS LT140 Tape Library User's Guide -Site Planning-
1
31
Copyright 2018 FUJITSU LIMITED
3
2
1
Example of the logical
element numbering of
tape drives
1
Installation example to
a 19-inch rack (42U)
P3AG-3712-01ENZ0