Connection To Multiple Servers; Figure 3.3 Direct Fc-Al/Sas Connection, A Multiple Server Connection, A Shared Library, And - Fujitsu Storage ETERNUS LT140 User Manual

Chapter 3 Connections
3.2 Direct FC-AL/SAS Connection to the Server
3.2.2

Connection to Multiple Servers

■ Tape library shared but not drives
The following figure shows an example of zoning when the LT140 is shared by two servers. In this case, all the
servers use the same backup software, and the LT140 is shared by the functions of this backup software.
However, the drives are not shared but individually belong to each server. Only one server controls the LT140
controller.
Figure 3.3 Direct FC-AL/SAS connection, a multiple server connection, a shared library, and tape drives that
are not shared
Server A
Backup software
LT140
FC cable/SAS cable
FUJITSU Storage ETERNUS LT140 Tape Library User's Guide -Site Planning-
Server B
Backup software
Controller
41
Copyright 2018 FUJITSU LIMITED P3AG-3712-01ENZ0