Fujitsu Storage ETERNUS LT140 User Manual page 26

Chapter 2 LT140 Installation
2.3 Installation Area
■ Mount position of the adapter block (square holes)
Mount the adapter block in the second square hole from the LT140 mount surface by skipping the first square
hole.
Adapter block
If the prop of the 19-inch rack has round holes, the opposite side of the adapter block must be set.
■ Incorrect mounting (square holes)
• The adapter block is mounted with the circular hole side to the prop with square holes.
The blue side is facing the
internal side of the rack
FUJITSU Storage ETERNUS LT140 Tape Library User's Guide -Site Planning-
Rack rail
Screw
Skip the first square hole
Mount surface
Rack prop: side view
26
Copyright 2018 FUJITSU LIMITED
The blue indicator for the
square holes is not visible
Rack prop: front view
P3AG-3712-01ENZ0