Chapter 2 LT140 Installation
2.2 Cushioning Material for Transportation
1-2
While pushing the locking mechanism on both sides, lift the top board from the front side of the
LT140.
1-3
Remove the top board by sliding it towards the frond of the LT140.
Step 2
2
Removing the cushioning material for transportation.
Lift the cushioning material to remove it from the inside of the LT140.
Do not touch the robot or components in the LT140. In addition, keep foreign substances from enter-
ing inside of the LT140. Failure to do so may cause failures.
FUJITSU Storage ETERNUS LT140 Tape Library User's Guide -Site Planning-
Top board
Step 1
19
Copyright 2018 FUJITSU LIMITED
P3AG-3712-01ENZ0